EMERGENCY STOP, LOCKED PUSCH BUTTONS Control push-buttons type NEF30 with metal housings are designed to be built into Ø30,5mm holes in consoles, control desks or directly in machines and equipment. There are produced two climatic versions: N/2 (for temperate climate) and W/3 (for tropical and sea climate). Each push button type NEF30 consists of the following units: - a driving unit, called the button drive - one, two or three contact blocks fastened to the drive. Fastening of push-buttons[...]

Control boxes are equipped with signal lamps or control push buttons manufactured by SN PROMET. Casing is made in ABS. There are two colours: yellow and grey. Control boxes are adapted for installation in closed spaces almost free of dust, gas and inflamable or chemically active vapours. There is a possibility of making descriptions of all functions for lamps or push buttons on special labels on the front panel. We make wiring inside control box. TECHNICAL DATA: dimensions: KP1 - 80 x 110 x[...]

SWITCH POSITION INDICATOR NEF30-WPW is designed for indicating of switches and disconecting switches position. On a front plate of the indicator there is a symbol of switch contact. There are 3 LEDs meant for indicating various position of switch: red (c) - position of work, yellow (g) - position of test and green (z) - position of complete disconnecting. POSITION INDICATOR NEF30-WP may be applied in systems of industries automatics and power industry, and particularly to signal contacts[...]

Switches series 83 758 in metal casings Limit switches are designed to be used in the automated driving systems, control and measurement circuits of alternating and direct current. In switches series 83 758 with casing, body of switch 83 135 or 83 136 is situated inside metal casing. There are mobile make contacts and break contacts in switches. Position and speed of change-over contacts movement and time needed for switching them over depend on position and speed of displacement of the controlling[...]

APPROPRIATION Position (limit) switches are controlled by suitable driving element. Position and speed of mobile contacts movement and time of switching them over depend on position and traveling speed of steering element that operate on pusher with a proper force, causing shorting-circuit or opening outof appropriate switch contacts. Set of mobile contacts is unstable, which means that after discontinuing of force operating on pusher, the mobile contacts return to initial position automatically.[...]

Lever switches type Z, ZP-1, Zcm2 and ZP1cm2 are designed for work in consoles, control desks and switching on and off elements of various AC and DC electric equipment. Lever switch type Z and Zcm2 has two stable positions. Lever switch type Z and Zcm2 has two stable positions. Lever switch type ZP-1 and ZP1cm2 has two return springs, which cause automatic return of lever and movable contact to initial position after release of strength on lever. Lever switches are produced without housing.[...]

CONTROL SWITCHES MJ Joysticks (return) are produced in 3 versions: MJ2 - 2-directions 2x(1NC+1NO) MJ4 - 4-directions 4x(1NC+1NO) MJ8 - 8-directions, omnidirectional 4x(1NC+1NO) Design modular, actuator and switch part separated. Deflection of stick approx. 12º. Mounting position: any. Switching element: with double-breaking spring contacts, self-clearing, contact AgNi 2 μm gold-plated, connection 2,8 x 0,5 mm solder any plug-in terminals combined. TECHNICAL DATA Operation temperature:[...]